Engine Inspection and Repair
At Specialized German, every used Volkswagen and
Audi engine must pass our strict inspection policy.
We first remove all accessories as these items are sold seperately.
Leak Down Test
A leak down test is then performed. This test is better than a compression test,
a leak down test checks the seals between the valves and valves seats. If the engine
does not pass this test, we remove the cylinder head for inspection. Any necessary
repairs are performed at that time and the cylinder head is reinstalled with a new
head gasket. The leakdown test is performed again to ensure that the engine will perform
perfectly when installed.
Bearing Inspection
We remove every oil pan and inspect for any problems with the crankshaft and or bearings.
All bearings are inspected and replaced if needed. By inspecting this aspect of the engine we
can tell if the previous owner maintained his vehicle the proper way. This inspection is the
most important because it is like preventative maintenance.
Timing Components
Every Volkswagen and Audi engine Specialized German sells
comes with a new timing belts installed. After our engines
go through our inspection process, we install new timing belts
and most engines have water pumps installed also. On timing
chain type engines, we remove timing covers and inspect all
tensioners, chains and guides and replace them as needed.
|
